混凝土攪拌機運轉時出現高溫的原因你知道有哪些嗎？實際上這個問題是眾多操作人員經常能見到的一個故障，下面就讓小編為您簡單講解一番吧。

Do you know the causes of high temperature during the operation of concrete mixer? In fact, this problem is often seen by many operators. Let's briefly explain it to you.

從生產實踐來看，如果發現操作盤上電流表指示的電流，是間斷期性的升高，常見的原因是：當設備各部運轉正常時，則需查找泥勺頭，此時泥勺頭很可能松動，勺頭松動是造成電流周期性間斷升高的主要原因。當然也應該檢泥勺底部是否有東西妨礙泥勺旋轉。

From the production practice, if it is found that the current indicated by the ammeter on the operating panel is an intermittent increase, the common reason is that when all parts of the equipment operate normally, it is necessary to find the head of the mud ladle. At this time, the head of the mud ladle is likely to be loose, and the loose head of the spoon is the main reason for the periodic intermittent increase of the current. Of course, you should also check whether there is something at the bottom of the mud ladle that hinders its rotation.

如果電流持續升高，不恢復到額定電流，則可能是由于負荷過大或電壓低造成的，屬于給料量大造成的要調整給料量，屬于機械題造成負荷過大，應停車處理。但是如果由電壓低造成的，則純屬外部供電原因，積極的辦法是勤觀察電流有無大的變化和電機溫升。

If the current continues to rise and does not return to the rated current, it may be caused by excessive load or low voltage. If it is caused by large feeding amount, the feeding amount should be adjusted. If it is caused by mechanical problems, the load should be stopped for treatment. However, if it is caused by low voltage, it is purely due to external power supply. The positive way is to frequently observe whether there is a big change in current and motor temperature rise.

如果突然出現此種現象，往往是由于粒度增大。礦石硬度變化，則可能由于采面不同，配料造成的。出現這兩種情況，攪拌過程會引起相應變化。

If this phenomenon occurs suddenly, it is usually due to the increase of particle size. The change of ore hardness may be caused by different mining faces and burden. In both cases, the mixing process will cause corresponding changes.

混凝土攪拌機運行時出現高溫的情況時，不要過于驚慌，找明原因然后才能問題。本廠http://ffyhk.cn有著成熟的制造工藝，具有嚴格的出廠標準，質量值得信賴，如有需要，歡迎廣大客戶前來咨詢訂購或來廠考察。

In case of high temperature during the operation of concrete mixer, do not panic too much. Find out the cause and then solve the problem. Our factory http://ffyhk.cn With mature manufacturing technology, strict factory standards and reliable quality, customers are welcome to consult and order or visit the factory if necessary.